1-8
MVS-8000A/8000ASF
Connecting the DME Special Cable
.
Connecting Procedure of the DME Special Cable
Follow the procedure below to connect the DME special
cable (supplied with the MVE-8000A/MVE-9000) to the
CN-2135 board connector.
1.
Loosen the two screws (B3
x
6)
1
of the cable
support bracket.
2.
Loosen the two screws (B3
x
6)
2
of the cable
support bracket.
3.
Pull the retaining bracket in the direction of the arrow
to open it.
4.
Connect the DME special cable to each connector.
Screw
2
Screw
1
Screw
2
Retaining
bracket
Screw
1
Cable support bracket
(The illustration shows the MVS-8000A.)
(The illustration shows the MVS-8000A.)
Retaining bracket
5.
Set the retaining bracket to the original position.
6.
Secure the retaining bracket with the two screws
2
that have been removed.
7.
Tighten the two screws
1
.
(The illustration shows the MVS-8000A.)
Retaining bracket
DME special cable
