1-26
MVS-8000A/8000ASF
<Swtich>
S500 (A-5) : OUT-CPU reset switch
Pressing this switch initializes the CPU on the circuit
board. (Valid only for the OUT-28A board)
S5300 (A-6) : MONITOR reset switch
The reset switch that is used to reset the monitoring during
maintenance through the terminal. (Valid only for the
OUT-28A board)
<LED on the CPU-DR Module>
Refer to <LED on the CPU-DR Module> in “1. CA-54A
board”. (CPU-DR is installed only on the OUT-28A
board.)
<Switch on the CPU-DR Module>
Refer to <Switch on the CPU-DR Module> in “1. CA-54A
board”. (CPU-DR is installed only on the OUT-28A
board.)
<LED on the CPU-DT module>
Refer to <LED on the CPU-DT module> in “1. CA-54A
board”. (CPU-DT is installed only on the OUT-28A
board.)
<Switch on the CPU-DT module>
Refer to <Switch on the CPU-DT module> in “1. CA-54A
board”. (CPU-DT is installed only on the OUT-28A
board.)
<LED>
D303, D307 (A-3) :
+
+
+
+
+
1.5 V-1, -2
+
1.5 V power supply status indication.
Lit when the
+
1.5 V power is supplied.
D503 (A-3) :
+
+
+
+
+
3.3 V
+
3.3 V power supply status indication.
Lit when the
+
3.3 V power is supplied.
D507 (A-2) :
+
+
+
+
+
12 V
+
12 V power supply status indication.
Lit when the
+
12 V power is supplied.
If this LED does not light, the fuse may have blown.
D2700 (A-2) :
+
+
+
+
+
5 V
+
5 V power supply status indication.
Lit when the
+
5 V power is supplied.
D3900 (A-6) : CONFIG. ERROR
Indicates the configuration error of the FPGA.
If this LED is lit, the FPGA can possibly be working
incorrectly.
D3901 (A-6) : PLL UNLOCK
Indicates lock/unlock of the PLL (Phase Locked Loop) in
the FPGA.
If this LED is lit, the PLL can possibly be unlocked.
D3902, D3903, D3904 (A-6) : C0, C1, C2 status LED
Indicates the status of CPU on the circuit board. (Valid
only for OUT-28A board)
