MHC-V7D
6
Playing music from a
Bluetooth device
For a
Bluetooth
device
1. Press the [
\
/
1
] button to turn the power on.
2. Press BLUETOOTH on the unit to select
Bluetooth
function.
“BT AUDIO” appears in the display panel.
3. Establish connection with the
Bluetooth
device.
Press BLUETOOTH on the unit to connect to the last
connected
Bluetooth
device.
Perform
the
Bluetooth
connection from the
Bluetooth
device if
the device is not connected.
Once the connection is established, the
Bluetooth
device name
appears in the display panel.
4. Press
N
.
Depending on the
Bluetooth
device,
– you may have to press
N
twice.
– you may need to start playback of an audio source on the
Bluetooth
device.
For an NFC-compatible smartphone
1. Press the [
\
/
1
] button to turn the power on.
Touch the smartphone to the N-Mark on the system to establish
the
Bluetooth
connection.
Start playback of an audio source on the smartphone. For
details on playback, refer to the operating instructions of your
smartphone.
To disconnect the
Bluetooth
device
For a
Bluetooth
device
Press BLUETOOTH on the unit.
“BT AUDIO” appears in the display panel.
For an NFC-compatible smartphone
Touch the smartphone to the N-Mark on the system again.
To erase all the pairing registration information perform
COLD RESET test mode (Refer page 20).
BOND FIXATION OF ELECTRIC PARTS
When 2CH DAMP board is replaced or the following object parts
are replaced, it is necessary to
fi
x parts to the boards by using a
speci
fi
ed bond without fail.
• Object boards
Complete 2CH DAMP board
• Object parts
Board
Ref. No.
2CH DAMP
C1210, C1211, L1000, L1002
• Use bond
1) SILICONE RTV ADHESIVE (UB-501G) 300ML
2) HM-40 (E318202) 300ML
• Parts position
1.
2CH DAMP board (page 6)
1. 2CH DAMP board
L1000
L1002
C1211
C1210
– 2CH DAMP Board (Component Side) –
The portion which applies bond:
Содержание MHC-V7D
Страница 103: ...MEMO MHC V7D 103 Ver 1 1 ...