![background image](http://html1.mh-extra.com/html/vizit/bkm-441/bkm-441_operating-instructions_1042622001.webp)
BKM
1
Commutator BKM
1
VIZIT
VIZIT
FEATURES
List of devices compatible with BKM-441
19w/14.4v/EU(18V/1.0A)
BPD
BPD
VIZIT
BVD
VIZIT
BK
-4MV
MVE, -4AV,
RVS
RVS , RVS-4M, -RVE-4
VIZIT
Note. Only monitors VIZIT
of
year of production and later will support
the full range of the Commutator’s functions described in this operating instruction.
produced before April 2013, and monitors VIZIT-456C produced in 2013 will have limited functions
with the Commutator BKM-441 such as: selection of an individual ring tone for a DOOR BELL button is not
available. For the calls from the DOOR BELL button, the ring tone will be the same as selected for an individual
doorstation.
PARTS LIST
BKM
SAFETY INSTRUCTIONS
24V
INSTALLATION
-44
-44
18/12-1-1
24/12-1-1
-401, -403, -405, -406, -407, -410, -411
-4М,
,-4
-10, -30М, -100М,
-2,
-4
-М440С -М440СМ -М456С -М456СМ -МТ460СМ
-М440С -М440СМ -М456СМ -МТ460СМ
2013
,
-441
1
1
OPERATING INSTRUCTION
(
)
:
-
-
-
-
,
.
:
.
:
.
:
,
,
,
,
.
,
,
,
the Commutator hereinafter is intended to connect monitors
to video and intercom lines
within
video doorphones.
Connection of calling devices to the apartment monitor
the main entrance multi-apartment video doorstation (intercom and video)
an individual doorstation on the storey (intercom and video)
a DOOR BELL button at the apartment door
Option to connect an electromechanical lock or strike
Power supply unit
regulated, 18V/1A. Other acceptable power supply units:
All models within the following model lines of individual video doorphones
Commutators and distribution amplifiers part of multi-apartment video doorphones
A DOOR BELL button - a button with normally open contacts
Colour video monitors
Electromechanical locks and trigger strikes, which have fail-locked with hold-open function. The lock/ strike is
unblocked after a short power impulse, and remains unblocked even when the power is off. The lock / strikes becomes
blocked again, after the door is opened and then closed again.
Commutator
pc.
Operating instruction
pc.
The Commutator does not contain voltage above
.
Do not perform any connections or repair when the power is on.
The Commutator shall be installed in heated premises with sufficient ventilation. The Commutator may be fixed either on
a wall, or on a DIN-rail.
v
v
v
v
v
v
v
v
All monitors
For qualified installation, wiring and servicing refer to technical and commercial partners of VIZIT TM.
The list of companies is given on VIZIT.EU (
.
http://vizit.eu/eurounion/)
- Drill 2 holes
in a wall, with 6 mm diameter and
mm depth.
- Drive anchors
(2) into the holes
Fix the unit by fastening 2 screws
25
in the anchors
(1)
30
6х30
.
-
3.5х
(3)
.
(1) - DI -
35
1-2
(2) -
-
rail, width
mm, depth
mm
Holder for fixing on a DIN rail
N
1
2
1
2
3
Figure1 -
Mounting on a wall
Figure 2 -
Mounting on a DIN-rail
Note. Fasteners are not supplied.
www.vizit-group.com
BKM-441 Operating Instruction (revision
11
5
2015-
) 1/