![background image](http://html.mh-extra.com/html/sony/mhc-v7d/mhc-v7d_service-manual_1330128020.webp)
MHC-V7D
20
SECTION 3
TEST MODE
[PANEL TEST MODE]
This mode is used to check the
fl
uorescent indicator tube, LEDs,
keys, [MULTI CONTROL] knob, model, destination, motion
gesture and software version.
Procedure:
1. Press
[
] button and [TUNING
‒
.
] button simultaneously
and hold 3 seconds.
2. All LEDs and segments in
fl
uorescent indicator tube are
lighted up.
3. When you want to enter to the software version display mode,
press [
+] button.
The model information appears on the
fl
uorescent indicator
tube.
Press
[
+] button again to view the destination information.
4. During the destination information display, press [
+] button.
Each time [
+] button is pressed, the
fl
uorescent indicator tube
shows the version of each category software in the following
sequence: SC, MTK, OPU, UI, PF, SUB, SYS, CD, CMA,
CMB, ST, TA, TM and return back to model information display.
5. When [
] button is pressed while the version numbers
are being displayed except model and destination, the
date of the software creation appears. When [
] button is
pressed again, the display returns to the software version
display.
6. When [ENTER] button is pressed after all LEDs and segments
in
fl
uorescent indicator tube light up, alternate segments in
fl
uorescent indicator tube and LEDs would light up, all RGB
LEDs and PARTY LIGHT LEDs would light up in red color.
If you press [ENTER] button again, another half of alternate
segments in
fl
uorescent indicator tube and LEDs would light
up, all RGB LEDs and PARTY LIGHT LEDs would light up
in green color. Pressing [ENTER] button again would cause
all segments in
fl
uorescent indicator tube and LEDs light up,
all RGB LEDs and PARTY LIGHT LEDs would light up in
blue color. Pressing [ENTER] button again would turn off all
segments in
fl
uorescent indicator tube and all LEDs including
RGB LEDs and PARTY LIGHT LEDs.
7. Press
[
‒
] button, the key check mode is activated.
8. In the key check mode, the
fl
uorescent indicator tube displays
“K 0 E0”.
Each time a button is pressed, “K” value increases. However,
once a button has been pressed, it is no longer taken into
account.
“E” value increases in the manner of 0, 1, 2, 3 ... if [MULTI
CONTROL] knob is turned clockwise, or it decreases in the
manner of 0, 9, 8, 7 ... if [MULTI CONTROL] knob is turned
counterclockwise.
The fluorescent indicator tube displays “<” or “>” or “
˄
” or
“
˅
” between “K 0” and “E0” each time swing left, right, up
and down at motion gesture.
9. To release from this mode, press the buttons in the same
manner as step 1, or disconnect the power cord.
[COLD RESET]
The cold reset clears all data including preset data stored in the
data flash to initial conditions included history mode data. Execute
this mode when returning the set to the customer.
Procedure:
1. Press the [
\/1
] button to turn the power on.
2. Press
[
] button and [
>
] button simultaneously
for 3 seconds.
3. “COLD RST” appears on the
fl
uorescent indicator tube. After
that, the fluorescent indicator tube will display “SONY”. The
set will automatically Power ON and Power OFF again, and
the system is reset.
[USER RESET]
The user reset clears all data including preset data stored in the data
flash to initial conditions exclude history mode data.
Procedure:
1. Press the [
\/1
] button to turn the power on.
2. Press [ENTER] button and [
>
] button simulta-
neously for 3 seconds.
3. The message “RESET” is displayed on the fluorescent
indicator tube, then becomes the standby state.
[DISC TRAY LOCK MODE]
This mode let you lock the disc tray. When this mode is activated,
the disc tray will not open when [
Z
] button is pressed. The message
“LOCKED” will be displayed on the fluorescent indicator tube.
This mode only applied when there is disc on the tray.
Procedure:
1. Press the [
\/1
] button to turn the power on.
2. Press the [FUNCTION] button to select the DVD/CD function.
3. Press the [
Z
] button to open the disc tray and insert the CD.
4. Press the [
Z
] button to close the disc tray.
5. Press [ENTER] button and [VOCAL FADER] button
simultaneously for 5 seconds.
6. The message “LOCKED” is displayed on the
fl
uorescent
indicator tube and the disc tray is locked.
(Even if pressing the [
Z
] button, the message “LOCKED” is
displayed on the fluorescent indicator tube and the disc tray is
locked)
Releasing method:
1. Press [ENTER] button and [VOCAL FADER] button
simultaneously for 5 seconds.
2. The message “UNLOCKED” is displayed on the fluorescent
indicator tube and the disc tray is unlocked.
[
Bluetooth PAIRING HISTORY CLEAR
]
It can clear the Bluetooth pairing history.
Procedure:
1. Press
the
[
\/1
] button to turn the power on.
2. Press the [BLUETOOTH] button to turn the Bluetooth func-
tion.
3. Press [ENTER] button and [
‒
] button simultaneously for 3
seconds.
4. The message “BT HIST”
→
“CLEAR” is displayed on the
fluorescent indicator tube, and the pairing history of Bluetooth
is cleared.
Содержание MHC-V7D
Страница 103: ...MEMO MHC V7D 103 Ver 1 1 ...