MHC-V7D
16
2
Insert the jig into a space and slowly
remove the panel, front block.
Note
1:
When using a jig, please work
so as not to injure panel, front
block and speaker cabinet.
2
Insert the jig into a space and slowly
remove the panel, front block.
Note
1:
When using a jig, please work
so as not to injure panel, front
block and speaker cabinet.
3
All bosses are removed while moving
jig in the direction of the arrow, and
panel, front block is removed.
3
All bosses are removed while moving
jig in the direction of the arrow, and
panel, front block is removed.
total fifteen bosses
1
one tapping screw
(1) (3.5 x 14)
5
Remove the panel, front block
in the direction of an arrow.
4
Remove the wire
from the clamp.
7
panel,
front
block
6
terminal (wide side)
[yellow]
6
terminal (wide side)
[yellow]
6
terminal (narrow)
[black/yellow]
6
terminal (narrow)
[black/yellow]
clamp
front panel
LOUDSPEAKER (4cm)
(Tweeter) (R-CH)
rear side
:LUHVHWWLQJ
2-9. FRONT PANEL BLOCK
Ver. 1.1
Содержание MHC-V7D
Страница 103: ...MEMO MHC V7D 103 Ver 1 1 ...