Sony LMD1751WCC, Руководство по эксплуатации

Страница: 12 / 41

Location and Function of Parts and Controls
12
DISPLAY” on page 26, “MARKER ENABLE” on page 27,
and “MULTI DISPLAY ENABLE” on page 28).
*9 The signal can only be selected in the main display (see
“SUB INPUT SELECT” on page 28).
*10 When a BKM-244CC is installed, closed captions are
displayed.
*11 When a BKM-250TG is installed, the signal is input.
Rear/Bottom Panel
a
Power switch
The power is turned on or off.
The monitor is turned on by pressing side
? .
b
AC IN socket
Connect the supplied AC power cord.
c
DC 24V IN connector (LMD-2451W) / DC 12V
IN connector (LMD-1751W)
Plug the DC power supply to this connector to provide
power to the monitor.
LMD-2451W runs on DC 24V and LMD-1751W runs
on DC 12V.
Note
Be sure to connect to a power supply of the specified
voltage value.
d
AUDIO L/R IN connectors (phono jack)
Connect to the audio outputs of a VCR or to an audio
mixer.
e
COMPOSITE IN connector (BNC)
Input connector for composite signals.
f
Y/C IN connector (4-pin mini-DIN)
Input connector for Y/C signals.
g
G/Y IN connector (BNC)
Input connector for G of RGB signals and component Y
(luminance) signals.
h
B/P
B
IN connector (BNC)
Input connector for B of RGB signals and P
B
(blue color
difference) of component signals.
i
R/P
R
IN connector (BNC)
Input connector for R of RGB signals and P
R
(red color
difference) of component signals.
j
EXT SYNC IN/OUT (external sync) connectors
(BNC)
To use the external sync signal, press the function button
that EXT SYNC is assigned (F1 button at the factory
setting).
IN connector
+ –
5 4 6 7 8 9 0
1 2 3
qd
qf qg qh qj qk
qa qs