Sony LMD1751WCC, Руководство по эксплуатации

Страница: 14 / 41

Installing to the Rack (LMD-1751W only) (using MB-530) / Adjusting the Height of the Stand
14
Installing to the Rack
(LMD-1751W only)
(using MB-530)
You can attach the LMD-1751W monitor to the rack by
using the optional MB-530 Mounting Bracket.
1
Attach the mounting bracket.
For details on attaching the mounting bracket,
refer to the mounting instructions of the mounting
bracket.
2
Attach the unit to the rack with four screws.
Note
The screws are not supplied. Prepare screws according
to the rack.
Adjusting the Height of
the Stand
LMD-2451W comes equipped with a stand. LMD-
1751W can be mounted on the optional SU-561 Monitor
Stand.
You can adjust the height of the monitor in three levels
for the LMD-2451W and four levels for the LMD-
1751W by changing the position of the stand attachment
bracket and the arm attachment position. Depending on
the height, you can install the input adaptor with the
stand attached to the monitor.
A and B in the following list indicate the screw holes
shown in the illustrations in steps
2 and 4 .
Height of the monitor
Unit: mm (inches)
1)
You can install the input adaptor with the stand attached to the
monitor.
2)
Default setting
3)
You cannot attach the stand in combinations of these positions.
For details on mounting the LMD-1751W on SU-561,
refer to the Mounting Instructions of SU-561.
1
Remove the stand attachment bracket
(see “To remove the stand attachment bracket”).
2
Attach the stand attachment bracket to the A or B
screw holes.
The bracket is attached to the B holes at the factory
(LMD-2451W only).
COMPOSITE
COMPONENT
RETUR
N
ENTER
MENU
BRIGHT
CHROMA
PHASE
CONTR
AST
VOLUME
CONTR
OL
Y/C
RGB
A-1
A-2
B-1
B-2
DVI
F1
F2
F3
F4
HD15
–
+
–
+
–
+
–
+
–
+
–
+
Position of the stand
attachment bracket A A B B
Arm attachment
position B A B A
LMD-2451W –
3)
430.5
(17) 471.6
1)
(18
5
/
8
)
497.9
1), 2)
(19
5
/
8
)
LMD-1751W 359.4
(14
1
/
4
)
385.7
(15
1
/
4
)
423.8
1)
(16
3
/
4
)
450.1
1)
(17
3
/
4
)
+ –
A A
A A
B B
B B
A A
A: Screw holes for low position
B: Screw holes for high position