Sony LMD1751WCC, Руководство по эксплуатации, Страница: 28 / 41

Adjustment Using the Menus
28
MULTI DISPLAY SETTING
SAFETY AREA Selects the safe area size for the
aspect ratio determined by the
button which the aspect function is
assigned.
You can select from among OFF,
80%, 85%, 88%, 90% and 93%.
When the marker is displayed, the
safe area for the marker is
displayed.
MARKER LEVEL Sets the luminance to display the
MARKER SELECT, CENTER
MARKER and SAFETY AREA.
You can select from among 1 to 3.
When the setting is low, the marker
is displayed dark.
MARKER MAT Selects whether you put mat on the
outside of the marker display.
•
OFF : No mat is put.
• HALF : Gray mat is put.
• BLACK : Black mat is put.
Submenu Setting
MULTI DISPLAY
ENABLE Selects ON to display the multi display
and OFF not to display.
Notes
• When the frame frequency of the
main display is different from that of
the sub display, the picture may be
disturbed. When no signal is input to
the main display, the picture may not
be displayed correctly.
• When the multi display is enabled,
the marker display is not available.
Submenu Setting
M U LT I D I S P L AY E N A B L E :
xxx
M U LT I D I S P L AY:
xxx
S U B I N P U T S E L E C T :
xxx
P O S I T I O N :
x
F R A M E :
x
S U B P I C T U R E S I Z E :
x
USER CONFIG – MULTI DISPLAY SETTING
MULTI DISPLAY • PIP/POP: The sub display is put in
the main display for the 16:9 display
and by the side of the main display
for the 4:3 display.
• SIDE BY SIDE: The main display is
put in the left side of the display and
the sub display is put in the right side
of the display.
Notes
• When the HD15 signal is input to the
main display, SIDE BY SIDE cannot
be selected on the menu.
• When MULTI DISPLAY is set to
SIDE BY SIDE, CTI (page 24) is not
available.
SUB INPUT
SELECT Sets the input signal of the sub display.
You can select from among
COMPOSITE, Y/C, RGB,
COMPONENT, OPTION A-1, OPTION
A-2, OPTION B-1, OPTION B-2,
VIDEO WAVE and OFF.
When you select VIDEO WAVE, the
waveform and audio level are displayed.
(Audio level is displayed only when you
connect the BKM-220D/243HS/244CC/
250TG.)
The indications of the waveform and
audio level signify as illustrated below,
although the percentage of the
waveform, audio level L/R CH, units
and values of the scale do not appear on
the display.
Notes
• The multi display with COMPOSITE
and Y/C, RGB and COMPONENT,
OPTION A-1 and OPTION A-2, and
OPTION B-1 and OPTION B-2 is not
displayed.
• When SUB INPUT SELECT is set to
OFF, the sub display is not displayed
even if you set MULTI DISPLAY
ENABLE to ON.
Submenu Setting
-4%
0%
25%
50%
75%
100%
0
-10
-20
-30
-60
109%
R CH L CH
Audio level Waveform
(dB)