Sony LMD-XH550MT, Инструкция по эксплуатации

Страница: 28 / 43

28
Pattern Skip
Input/Output Configuration (page 30)
Clone Out
Port A Input Select
Port B Input Select
Input Name
AUX IN Setting
Power Supply
System Configuration (page 31)
Control Lock
OSD Setting
Power On Setting
Power Save
Serial Remote
Remote
Ethernet Setting
Custom Button
Panel Display
A.I.M.E. Setting
Monitor Information
Initial Setup (page 33)
Language
Port A Input Select
Port B Input Select
Pattern Skip
PIP / POP
Custom Button
Preset (page 34)
Load User Setting
Save User Setting
User Name
Load Default
Adjusting and Changing the Settings
Color Tone Adjustment menu
The Color Tone Adjustment menu is used to
adjust picture quality for each input.
You need to use the measurement instrument to
adjust the color temperature.
Recommended: Konica Minolta color analyzer
CA-310 or equivalent
Menu Setting
Gamma Select the appropriate gamma mode
from “1.8,” “2.0,” “2.2,” “2.4,” “2.6,”
“DICOM,” “Highlight,” “HLG,” or “Auto.”
“DICOM” is for reference, not for
diagnostic purposes.
Select “HLG” when the input signal is
HDR-HLG.
Phase Adjusts color tones. The higher the
setting, the more greenish the picture.
The lower the setting, the more
purplish the picture.
Chroma Adjusts color intensity. The higher the
setting, the greater the intensity. The
lower the setting, the lower the
intensity.
Brightness Adjusts brightness.
Contrast Adjusts contrast.
A.I.M.E. Select the A.I.M.E.
1)
function from
“Off,” “On,” or “Check Mode.”
When you select “Check Mode,” both
images of A.I.M.E. “Off” / “On” are
displayed.
Identical images are displayed side by
side in 2D, and the A.I.M.E. function is
applied to the image on the right. A
single image is divided and displayed
side by side in 3D, and the A.I.M.E.
function is applied to the image on the
right.
1) A.I.M.E.: Enables better image
reproduction and display.

The A.I.M.E. Logo is displayed on
the Status Display when the A.I.M.E.
function is activated.

The NR setting is applied when the
A.I.M.E. function is activated.
(page 33)

When the PIP/POP view is set, the
A.I.M.E. setting is applied only to
the input connector selected on the
main display.
A.I.M.E. Structure Adjusts contrast enhancement.
A.I.M.E. Color Adjusts color enhancement.
A.I.M.E. Shadow Adjusts visibility of the dark area.
Color Temperature Select the color temperature from
“D93,” or “D65.”
Note
If the setting is changed, Gain R/G/B
Offset and Bias R/G/B Offset are
restored to 0 respectively.
Gain R Offset
Gain G Offset
Gain B Offset Adjust color temperature in detail, and
color balance (Gain).
Bias R Offset
Bias G Offset
Bias B Offset Adjust color temperature in detail, and
color balance (Bias).