33
Initial Setup menu
The Initial Setup menu is used to make the basic
settings to use the unit.
Remote
Remote Mode
Sets the remote function when the
REMOTE connector is connected to the
optional Foot Switch FS-24.
Off:
Inactivates the remote function.
Port A/B:
Switches between PORT A and
PORT B.
PIP / POP:
Switches between the single-image
display and 2 or 3 screens display
(PIP1/PIP2/POP1/POP2).
Flip Pattern:
Switches the flip pattern between
“Off” and “Rotation.”
2D/3D Select:
Switches between 2D and 3D
displays.
A.I.M.E.:
Switches between “On” and “Off” of
the A.I.M.E. function.
Ethernet Setting
Sets the Ethernet.
IP Address:
Sets the IP Address.
Subnet Mask:
Sets the Subnet Mask.
Default Gateway:
Sets “On” or “Off” of the Default
Gateway.
Address:
Sets the Default Gateway.
Save:
Saves the confirmed setting.
Cancel:
Returns to the previous setting
from the confirmed setting.
Custom Button
Assigns the function to the CUSTOM 1
or CUSTOM 2 button on the front
panel, and can set the following
functions to on or off.
No Setting
Scan Size
4K Zoom
Flip Pattern
POP Sub Screen Position
Gamma
Mono
Contrast
Brightness
Chroma
Phase
Clone Out Format
AUX IN
3D Signal Format
3D Disparity
Port C Display
Panel Display
Backlight
Adjusts the brightness of the display. A
higher setting increases the brightness
of the display, and a lower setting
darkens the display.
Menu
Setting
Backlight Control
Off:
Turns off backlight control.
Standard:
Sets the backlight to standard
brightness mode.
High:
Sets the backlight to high
brightness mode.
Auto:
Automatically switches between
“Standard” and “High” according to
the gamma settings.
3D Color Temp
Offset
Select the mode to reflect color
temperature correction while using 3D
glasses.
Auto:
Applies the correction value for 3D
display. The correction value is not
applied for 2D or 3D to 2D Convert
display.
On:
Applies the correction value
regardless of 2D, 3D, or 3D to 2D
Convert display.
Off:
Does not apply the correction value
regardless of 2D, 3D, or 3D to 2D
Convert display.
3D R Offset
3D G Offset
3D B Offset
Finely adjusts color temperature
correction. Adjusts color bias (gain).
A.I.M.E. Setting
NR
Sets a noise reduction level of an
image when the A.I.M.E. function is
activated. A higher setting increases
the noise reduction level. For details
on the A.I.M.E. function, see page 28.
Monitor Information
Software Version
Displays the software version.
Menu
Setting
Language
You can select the menu or message
language from the following
languages.
English: English
: Chinese
: Japanese
Italiano: Italian
: Spanish
Deutsch: German
: French
Port A Input Select
Sets the input connector that is
skipped when changing the input
signal by pressing the PORT A button.
Set to “Not Skip” or “Skip” for the 12G-
SDI 1, 12G-SDI 2, 3G-SDI, Display Port,
HDMI, DVI-D connector.
Menu
Setting
Содержание LMD-XH550MT
Страница 43: ......
