Sony LMD-XH550MT, Инструкция по эксплуатации

Страница: 6 / 43

6
Guidance and manufacturer’s declaration – electromagnetic immunity
The LMD-XH550MT is intended for use in the electromagnetic environment specified below. The
customer or the user of the LMD-XH550MT should assure that it is used in such an environment.
Immunity test
IEC 60601
test level
Compliance
level
Electromagnetic environment – guidance
Portable and mobile RF communications
equipment should be used no closer to any part
of the LMD-XH550MT, including cables, than the
recommended separation distance calculated
from the equation appliance to the frequency of
the transmitter.
Recommended separation distance
Conducted RF
IEC 61000-4-6
3 Vrms
150 kHz to
80 MHz
outside ISM
bands
c
3 Vrms
d
= 1.2
Ɗ P
6 Vrms
150 kHz to
80 MHz
in ISM bands
c
6 Vrms
Radiated RF
IEC 61000-4-3
3 V/m
80 MHz to
2.7 GHz
3 V/m IEC 60601-1-2: 2007
d = 1.2 Ɗ P 80 MHz to 800 MHz
d
= 2.3
Ɗ P
800 MHz to 2.5 GHz
IEC 60601-1-2: 2014
d
= 2.0 Ɗ
P
80 MHz to 2.7 GHz
Where P is the maximum output power rating of
the transmitter in watts (W) according to the
transmitter manufacturer and
d
is the
recommended separation distance in meters (m).
Field strengths from fixed RF transmitters, as
determined by an electromagnetic site survey,
a
should be less than the compliance level in each
frequency range.
b
Interference may occur in the vicinity of
equipment marked with following symbol:
NOTE 1: At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.