18
Tips
• Pressing
·
or
ª
while the system is off
automatically turns on the system and starts tape
playback if there is a tape in the deck (One Touch
Play).
• You can switch from another source to the tape
deck just by pressing
·
or
ª
(Automatic Source
Selection).
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
“DOLBY NR B” appears in the display.
1
Press
6
EJECT and insert a
recorded tape in deck A or B.
2
Press DIRECTION repeatedly to
select
A
to play one side,
ß
* to
play both sides, or RELAY (Relay
Play)** to play both decks in
succession.
3
Press
·
.
Press
ª
to play the reverse side. The
tape starts playing.
* The deck stops automatically after playing
both sides five times.
** Relay Play always plays according to the
following sequence:
Deck A (front side), Deck A (reverse side),
Deck B (front side), Deck B (reverse side).
To
Do this
Stop play
Press
p
(or
π
on the
remote).
Pause (Deck B only) Press
P
(or
∏
on the
remote). Press again to
resume play.
Fast-forward
Press
)
while playing
the front side or
0
while
playing the reverse side
(or press
º
/
‚
on the
remote).
Rewind
Press
0
while playing
the front side or
)
while
playing the reverse side
(or press
º
/
‚
on the
remote).
Remove the cassette Press
6
EJECT.
Adjust the volume
Turn VOLUME (or press
VOL +/– on the remote).
Playing a tape
(
continued
)
With the side you want
to play facing forward
ª
ª
6
P
r
0
)
6
ª
ª
p
0
)
p
