manualshive.com logo in svg

Sony ixs-6600, Руководство по установке

Поделиться
Скачать
Sony ixs-6600 Скачать руководство пользователя страница 7

3

IXS-6600/6700

Purpose of this manual

This manual is the installation manual of Integrated Routing System IXS-6700/IXS-
6600 and the optional boards.
This manual is intended for use by trained system and service engineers, and
deicribes the information on installing the IXS-6700/IXS-6600.

Related manuals

Besides this Installation Manual, the following manuals are prepared for the IXS-
6700/IXS-6600 and the optional boards.

.....

Operation Manual (Supplied with IXS-6700/IXS-6600)

This manual describes the application and operation of IXS-6700/IXS-6600.

.....

System Setup Manual (Supplied with IXS-6700/IXS-6600)

This manual describes the software initialization or operation confirmation.

.....

Maintenance Manual (Available on request)

This manual describes the information that premises the parts level service
(adjustment, parts list, diagrams, etc.).
If this manual is required, please contact your local Sony Sales Office/Service
Center.

.....

Protocol Manual (Available on request)

This manual describes the protocol for controlling this unit.
The manual below is provided for the protocol that this unit can support.
If this manual is required, please contact your local Sony Sales Office/Service Center.

SONY ROUTING SWITCHER SYSTEM
REMOTE1 (S-BUS/ROT16) PROTOCOL and COMMAND SPECIFICATIONS
Part No.: 9-977-477-xx

SONY ROUTING SWITCHER SYSTEM
REMOTE2 (Cart

++

) PROTOCOL and COMMAND SPECIFICATIONS

Part No.: 9-967-261-2x

Trademarks

Trademarks and registered trademarks used in this manual are follows.

.

Ethernet is a registered trademark of Xerox Corporation.

.

IBM and AT are registered trademarks of International Business Machines
Corporation.

.

Pentium is a registered trademark of Intel Corporation.

.

Windows is a registered trademark of Microsoft Corporation.

Manual Structure

Содержание ixs-6600











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды