Ad
mi
ni
st
ra
ti
n
g
th
e Ca
mer
a
Setting the Camera Image and Audio — Camera Menu
36
Setting the Camera
Image and Audio
— Camera Menu
When you click
Camera
in the Administrator menu, the
Camera menu appears.
Use this menu to set the functions of the camera.
The Camera menu consists of five tabs:
Common
,
Picture
,
Day/Night, Video codec
and
Streaming
.
Common Tab
Image mode
Selects the mode of the image output from the camera.
Field:
Select this option when shooting a moving image.
Frame:
Select this option when shooting a still image.
With this setting, the vertical resolution increases but
the edge of a moving object may be jagged.
Auto:
The
Frame
or
Field
mode process is
automatically performed depending on movement in
the image.
Frame
is performed for an area without
movement, and
Field
is performed for an area with
movement.
Color
Select
Color
or
Monochrome
for the image.
Zoom mode
Selects the zoom mode.
Full:
An image can be zoomed up to 26× optical zoom
and 12× digital zoom, 312× zoom in total.
Optical:
An image can be zoomed up to 26× optical
zoom.
Focus mode
Selects the focus mode.
Auto:
The focus is automatically adjusted.
Manual:
The focus can be adjusted by using the
Near,
Far
and
One Push Focus
buttons of the control
panel displayed from the main viewer.
Stabilizer
Select the stabilizer to compensate for oscillation. Select
On
to activate the stabilizer when the camera is affected
by oscillation.
Notes
• The view angle of the camera is reduced by
approximately 10 % when
Stabilizer
is set to
On
.
• The frame rate lowers half when
Stabilizer
is set to
On
.
• The stabilizer may not be effective depending on the
degree of oscillation.
Microphone
Select whether you are going to send the audio from the
m
microphone input connector. Select
On
to send the
audio from this network camera.
Note
When you change the
Microphone
setting, click
Refresh
on the browser to reflect the change when
opening the main viewer page.
Mic volume
Set the volume level of the audio input from the
m
microphone input connector. It is adjustable from
–10
to
+10
.
Audio codec
Select the bit rate when you send the audio from the
m
microphone input connector.
G.711 (64kbps)
,
G.726
(40kbps)
,
G.726 (32kbps)
,
G.726 (24kbps)
or
G.726
(16kbps)
can be selected.
Notes
• If the bit rate is set to other than
G.711(64kbps)
, no
audio is output when you use the Java applet viewer.
• When
MPEG4
is selected for
Codec
in the Alarm
buffer menu, no audio is output when you use Java
applet viewer.
