50
5
When the writing process is complete, select [Close]
and press the ENTER button.
To cancel transfer to external media, select [Abort]
and press the ENTER button.
The [MENU] screen appears again.
You can record up to 24 continuous hours from the
moment you start recording or capture a still image. After
24 hours, recording will stop automatically, and the
“close folder” is performed.
Recorded data directory
Video data is stored in one of the following directories,
depending on the system administrator settings.
• <uppermost folder of the external media>/<recording
start date (year, month, day, hour, minute,
second)_patient ID>/MOVIE/<title number>/
• <uppermost folder of the external media>/<patient
ID>/<recording start date (year, month, day, hour,
minute, second)>/MOVIE/<title number>/
• <uppermost folder of the external media>/<recording
start date (year, month, day, hour, minute,
second)_patient name>/MOVIE/<title number>/
• <uppermost folder of the external media>/<patient
name>/<recording start date (year, month, day, hour,
minute, second)>/MOVIE/<title number>/
• <uppermost folder of the external media>/<patient
ID_patient name>/MOVIE/<title number>/
• <uppermost folder of the external media>/<patient
name_recording start date (year, month, day, hour,
minute, second)>/MOVIE/<title number>/
• The order of the year, month, and day of the recording
date used in the storage directory is based on the date
format of the system settings.
• If the power supply is disconnected before the writing
of the data is complete, the validity of the written data
cannot be guaranteed.
• When recording to external media, the media can be
switched out up to 15 times for a single recorded data
entry. When this limit is exceeded, the “Exch. media
limit exceeded” message appears on the [End
Recording] screen.
• If you press the
z
REC button again, recording will
start again as a new title for the same patient.
Capture Still Images
You can capture a particular shot during a live
transmission, and store it as a still image file.
Still images can be captured manually or via contact
switch. This section describes manual operations.
For details on contact switch controls, contact your local
Sony representative.
Manual Still Image Capture
To capture a still image, press the
CAPTURE button
at the moment you want to capture the still image.
A chapter separator is also created at the position in which
the still image was captured.
Recorded data entries are created when still images are
captured.
If the surgical procedure or examination is finished and
you want to end the recording session, perform the
recording end procedure.
For details on use, see “Step 4: End Recording”
(page 44).
• When you perform image capture while using the PinP
function with an inset image displayed, only the main
image will be captured. The inset image will not be
captured.
• You can configure format setting for still images files in
the [User Settings] screen – [Quality] tab.
For details on this setting, see “Configuring Image
Quality Settings” (page 35).
Still image data directory
Still image data is stored in one of the following
directories, depending on the system administrator
settings.
• <uppermost folder of the external media>/<recording
start date (year, month, day, hour, minute,
second)_patient ID>/STILL/
• <uppermost folder of the external media>/<patient
ID>/<recording start date (year, month, day, hour,
minute, second)>/STILL/
• <uppermost folder of the external media>/<recording
start date (year, month, day, hour, minute,
second)_patient name>/STILL/
Tip
Tips
Tip
Tips
Содержание HVO-3300MT
Страница 99: ......
