Sony HT-XT2, Руководство по эксплуатации

Страница: 55 / 227

55
US
T
rouble
s
hoot
ing
The system cannot connect to the
network.

The wireless LAN function is not
available when using the wireless
surround function. Connect to the
network via wired LAN.
The wireless speakers cannot be
connected to the system.

Update the software version of the
system and wireless speakers to the
latest version.
The remote control of this system
does not function.

Point the remote control at the
remote control sensor on the unit
(page 8).

Remove any obstacles in the path
between the remote control and the
system.

Replace both batteries in the remote
control with new ones, if they are
weak.

Make sure you are pressing the
correct button on the remote control.
The Control for HDMI function does
not work properly.

Check the connection with the
system (refer to the supplied Startup
Guide).

Enable the Control for HDMI function
on the TV. For details, refer to the
operating instructions of your TV.

Wait a while, and then try again. If
you unplug the system, it will take a
while before operations can be made.
Wait for 15 seconds or longer, and
then try again.

The type and number of devices that
can be controlled by the Control for
HDMI function is restricted by the
HDMI CEC standard as follows:
– Recording devices (Blu-ray Disc
recorder, DVD recorder, etc.): up to
3 devices
– Playback devices (Blu-ray Disc
Player, DVD player, etc.): up to 3
devices
– Tuner-related devices: up to 4
devices
– Audio system (receiver/
headphone): up to 1 device (used by
this system)
“PRTCT,” “PUSH” and “POWER”
flash alternately in the front panel
display.

Press

(power) to turn off the
system. After the indicator
disappears, disconnect the AC power
cord (mains lead) and make sure
nothing is obstructing the ventilation
holes of the system.
“BT TX” appears in the front panel
display.

Press RX/TX on the remote control to
switch [Bluetooth Mode] to
[Receiver]. “BT TX” appears if
[Bluetooth Mode] is set to
[Transmitter] (page 44). When you
press RX/TX on the remote control,
[Bluetooth Mode] is switched to
[Receiver] and the selected input
appears in the front panel display.
Remote Control
Others