Sony HT-XT2, Руководство по эксплуатации

Страница: 53 / 227

53
US
T
rouble
s
hoot
ing
BLUETOOTH connection cannot be
completed.

Make sure that the BLUETOOTH
indicator of the unit is lit (page 8).

Make sure the BLUETOOTH device to
be connected with is turned on and
the BLUETOOTH function is enabled.

Bring this system and the
BLUETOOTH device closer together.

Pair this system and the BLUETOOTH
device again. You may need to cancel
the pairing with this system using
your BLUETOOTH device first.

Pairing information may be deleted.
Perform pairing operation again
(page 24).
Pairing cannot be achieved.

Bring this system and the
BLUETOOTH device closer together.

Make sure this system is not receiving
interference from a wireless LAN
device, other 2.4 GHz wireless
devices, or a microwave oven. If a
device that generates
electromagnetic radiation is nearby,
move the device away from this
system.
You cannot use the NFC function.

The NFC function does not work with
BLUETOOTH-compatible headphones
or speaker. To listen to sound using a
BLUETOOTH-compatible headphones
or speaker, see “Listening to Sound of
the Connected TV or Device from
Headphones or Speakers” (page 27).
No sound is output from the
connected BLUETOOTH device.

Make sure that the BLUETOOTH
indicator of the unit is lit (page 25).

Bring this system and the
BLUETOOTH device closer together.

If a device that generates
electromagnetic radiation, such as a
wireless LAN device, other
BLUETOOTH devices, or a microwave
oven is nearby, move the device away
from this system.

Remove any obstacle between this
system and the BLUETOOTH device or
move this system away from the
obstacle.

Reposition the connected
BLUETOOTH device.

Switch the wireless LAN frequency of
any nearby Wi-Fi router or PC to
5 GHz range.

Increase the volume on the
connected BLUETOOTH device.

Set [Wireless Playback Quality] to
[Connection] (page 45).
The system cannot connect to the
network.

Check the network connection
(page 15) and the network settings
(page 46).
You cannot connect your PC to the
Internet after [Wi-Fi Protected
Setup™ (WPS)] is performed.

The wireless settings of the router
may change automatically if you use
the Wi-Fi Protected Setup function
before adjusting the settings of the
router. In this case, change the
wireless settings of your PC
accordingly.
The system cannot connect to the
network or the network connection
is unstable.

Make sure the wireless LAN router is
on.
Headphones or Speaker
Connection via BLUETOOTH
Wired LAN Connection
Wireless LAN Connection