Sony HKSR-9003, Руководство по эксплуатации

Страница: 78 / 177

Recording 78
Ch
apt
er 4
Re
c
o
rdin
g/
Pla
y
ba
c
k
3
Turn the SELECT/ENTER dial to
select the signal to record on the track
selected in steps
1 and 2 .
SDI1 to SDI12 (displayed when the
HKSR-9001 is installed): SDI signal
input to the AUX IN connector
ANA1 and ANA2: Analog audio signal
input to the AUDIO INPUT CH-1 and
CH-2 connectors
OFF: Do not record audio signals (silent)
4
Press the SELECT/ENTER dial.
5
Repeat steps 1 and 2 to select other
tracks and steps 3 and 4 to select other
signals.
To select audio signals to monitor
The PHONE SEL item allows you to select the
audio signals to output to the EARPHONES jacks
for the individual channels.
1
Turn the SELECT/ENTER dial to
select a channel (1 to 12).
2
Press the SELECT/ENTER dial.
The L/R setting of the selected channel
changes in the order L
t R t LR t none.
Select “none” if you do not want to output the
selected channel to the EARPHONES jack.
Select LR if you want to output the channel
from both sides.
3
Repeat steps 1 and 2 to select other
channels and steps 3 and 4 to make L/R
settings for those channels.
4
When you are finished, turn the
SELECT/ENTER dial to select END,
and press the dial.
To select the digital audio signal mixing
method
1
Turn the SELECT/ENTER dial to
select the mixing method.
ADD: Simple addition
RMS: Multiplied average (room mean
square)
Average: Simple average
2
Press the SELECT/ENTER dial.
To check recording audio levels, use the audio
level meters in the control panel display. The
display switches automatically between
recording audio levels during recording and
playback audio levels during playback.
To set the display range of the audio
level meters
The AUDIO Setup >METER TYPE in the VTR
menu allows you to set the display range of the
audio level meters.
Cursor
Audio output levels
Channel numbers
L/R settings
Setting Recording Audio Levels