Sony HKSR-9003, Руководство по эксплуатации

Страница: 52 / 177

Adjusting the White Balance (in Custom Mode) 52
Chap
ter
3
Ba
s
ic
Ad
jus
tme
nt
s
an
d Set
tings
Note
Be careful not to have any high luminance spots in
the rectangle.
4
Adjust the lens iris opening or set the
shutter to ON.
With a manually adjusted lens: Set the
opening to an appropriate value.
With a lens that has automatic iris control:
Set the lens automatic/manual iris
control switch to automatic.
Or, set the video level to an appropriate
value, using the shutter setting.
5
Perform automatic white balance
adjustment.
The message “AWB EXECUTING” appears
on the viewfinder screen. If the adjustment
process succeeds, the message “AWB: OK”
appears.
If automatic white balance adjustment fails
If the automatic white balance adjustment process
fails, the error message “AWB: NG” appears on
the viewfinder screen for about three seconds.
If this error message appears, try adjusting the
white balance again.
If the subject has a higher color temperature, use
an optical filter or set 5600K to ON, then try
white balance adjustment again.
If the error message continues to appear after
several attempts, the unit requires internal
inspection.
To adjust on the <AUTO SETUP> page of
the MAINTENANCE menu
Referring to the procedure in “Setting the Built-in
Clock”
(page 38) , select the MAINTENANCE
menu in the <TOP MENU> screen and display
the <AUTO SETUP> page.
Move the cursor to AUTO WHITE, and then
press the MENU SEL/ENTER dial.
Select “EXEC” when a confirmation message
appears.
For details on Camera menu operations, see “Basic
Camera Menu Operations” (page 89).
To adjust with the assignable switch
If AWB is assigned to assignable switch 4, push
the switch up to “4”, then release it.
For details on assigning a function to the switch, see
“Assigning Functions to Assignable Buttons/Switch”
(page 48).
To adjust from a remote control unit
When the RM-B750 or RM-B150 remote control
unit is connected to the REMOTE connector,
press the AWB button.
A rectangle centered in the screen.
The length of the sides must be at
least 70% of the height and width of
the screen.
Within this rectangle, there must be
an area of white greater than 10%
of the entire screen.