Sony HKSR-9003, Руководство по эксплуатации

Страница: 134 / 177

VTR Menu List 134
Chap
te
r
5
Men
u
Con
fig
ur
at
ion an
d D
e
ta
iled
S
e
tt
in
gs
OUTPUT SEL
Track selection (when the
optional HKSR-9001 is
installed) CH1 Selects the track to assign to channel 1 of the SDI output.
Track 1 to Track 12
CH2 Selects the track to assign to channel 2 of the SDI output.
Track 1 to Track 12 (Track 2)
CH3 Selects the track to assign to channel 3 of the SDI output.
Track 1 to Track 12 (Track 3)
CH4 Selects the track to assign to channel 4 of the SDI output.
Track 1 to Track 12 (Track 4)
CH5 Selects the track to assign to channel 5 of the SDI output.
Track 1 to Track 12 (Track 5)
CH6 Selects the track to assign to channel 6 of the SDI output.
Track 1 to Track 12 (Track 6)
CH7 Selects the track to assign to channel 7 of the SDI output.
Track 1 to Track 12 (Track 7)
CH8 Selects the track to assign to channel 8 of the SDI output.
Track 1 to Track 12 (Track 8)
CH9 Selects the track to assign to channel 9 of the SDI output.
Track 1 to Track 12 (Track 9)
CH10 Selects the track to assign to channel 10 of the SDI output.
Track 1 to Track 12 (Track 10)
CH11 Selects the track to assign to channel 11 of the SDI output.
Track 1 to Track 12 (Track 11)
CH12 Selects the track to assign to channel 12 of the SDI output.
Track 1 to Track 12
PHONE SEL Selects the audio signals output to the EARPHONES jack.
MIX MODE Selects the method of mixing audio signals output to the
EARPHONES jack.
ADD [Add]: Simple addition
RMS [RMS]: Multiplied average (root mean square)
AVG [Average]: Simple average
REC LEVEL Adjusts the audio recording level (see page 84) . (This
adjustment is impossible during playback.)
PB LEVEL Adjusts the audio playback level (see page 79) . (This
adjustment is impossible during recording.)
METER TYPE Sets the audio level meter display range.
PEAK [Full Peak]: Display 0 dBFS as the peak value.
REF [Full Ref]: Display the reference level (+4 dBu) as 0
dB.
FINE [Fine]: Display a scale with 0.25 dB steps centered
around –20 dB.
PEAK HOLD Selects whether to use the peak hold function.
ON [On]: Use.
OFF [Off]: Do not use.
Item Settings