— 43 —
KP-51WS500/57WS500/65WS500
2-15. AUTO REGISTRATION ERROR CODES
If an error code is displayed after the set has been correctly adjusted, check the following items: position, tilt and sizing. If any of these adjustments are
off, even slightly, the auto-registration pattern will not hit the four sensors properly. This occurs when the internal generator patterns are being
ß
ashed
on the screen for the sensors to read. Therefore, auto registration (called auto convergence) cannot operate properly, causing an error code to be
displayed. In order for this function to operate properly correct position, tilt, and size must be adjusted properly.
ERROR CODE LIST
ERROR
CODE
DESCRIPTION
NOTE
00
No Error
10
Sensor 0 low output
Check sensor 0, connection/wiring, circuit, and pattern position
(are patterns hitting sensor?) adjust "64VUP" if necessary.
11
Sensor 1 low output
Check sensor 1, connection/wiring, circuit, and pattern position
(are patterns hitting sensor?) adjust "69 HLE" if necessary.
12
Sensor 2 low output
Check sensor 2, connection/wiring, circuit, and pattern position
(are patterns hitting sensor?) adjust "73 HRIV" if necessary.
13
Sensor 3 low output
Check sensor 3, connection/wiring, circuit, and pattern position
(are patterns hitting sensor?) adjust "68 VLOW" if necessary.
20
Sensor 0 high output
Check sensor 0 and circuit.
21
Sensor 1 high output
Check sensor 1 and circuit.
22
Sensor 2 high output
Check sensor 2 and circuit.
23
Sensor 3 high output
Check sensor 3 and circuit.
30
V CENT or SKEW adjustment loop overflow
Check "66 VMID" data and check registration condition.
31
H CENT or SKEW adjustment loop overflow
Check "71 HMID" data and check registration condition.
32
H LIN or SIZE adjustment loop overflow
Check "71 HMID" data and check registration condition.
40
V CENT regi data overflow
Check "66 VMID" data and confirm V CENT data (all modes) is not near 511.
41
H CENT regi data overflow
Check "71 HMID" data and confirm H CENT data (all modes) is not near 511.
42
V SKEW regi data overflow
Check "66 VMID" data and confirm V SKEW data (all modes) is not near 511.
43
H SKEW regi data overflow
Check "71 HMID" data and confirm H SKEW data (all modes) is not near 511.
44
H LIN regi data overflow
Check "71 HMID" data and confirm H CENT data (all modes) is not near 511.
45
H SIZE regi data overflow
Check "71 HMID" data and confirm H CENT data (all modes) is not near 511.
50
V CENT regi data overdrow
Check "66 VMID" data and confirm V CENT data (all modes) is not near -512.
51
H CENT regi data overdrow
Check "71 HMID" data and confirm H CENT data (all modes) is not near -512.
52
V SKEW regi data overdrow
Check "66 VMID" data and confirm V SKEW data (all modes) is not near -512.
53
H SKEW regi data overdrow
Check "71 HMID" data and confirm H SKEW data (all modes) is not near -512.
54H LIN regi data overdrow
Check "71 HMID" data and confirm H CENT data (all modes) is not near -512.
55
H SIZE regi data overdrow
Check "71 HMID" data and confirm V CENT data (all modes) is not near -512.
60
H or V CENT offset overflow
Check "71 HMID" and "66 VMID" data and check registration condition.
61
H or V SKEW offset overflow
Check SKEW adjustment.
62
H SIZE or LIN offset overflow
Check "71 HMID" data, check "66 VMID" data, and check SIZE and LIN adjustment.
70
H or V CENT offset overdrow
Check "71" HMID" data and check "66 VMID" data.
71
H or V SKEW offset overdrow
Check SKEW adjustment.
72
H SIZE or LIN offset overdrow
Check "69 HLB" data, check "73 HRIV" data, and check SIZE and LIN adjustment.
80
SIZE Limit Error
Check that H SIZE data is negative and not near zero.
