HDVF-C950W
2-3 (E)
2-3. OPERATION Menu
The OPERATION menu contains the setting items required when the camera operator is using the device.
For more information, refer to the operation manual that comes with this device.
2-4. SERVICE Menu
The SERVICE menu contains items required for maintaining the View Finder, such as electrical align-
ment, HOURS METER, and self-diagnosis function.
m
.
The next menu item may not be selectable depending on the current menu item setting.
.
“
___
” is displayed as the parameter for unselectable items.
Page Menu
Items
Setting ( indicates the default)
Function
S01
*
1
ADJUST
INVERTER POWER
0 to 215
Adjusts the inverter power
supply voltage
BL DIMMER
0 to 255
Adjusts the backlight
S02
*
1
COLOR
ADJUST BIAS R
_
512 to 511
Adjusts the black level color
TEMP
ADJUST BIAS G
_
512 to 511
temperature
ADJUST BIAS B
_
512 to 511
ADJUST GAIN R
0 to 255
Adjusts the white level color
ADJUST GAIN G
0 to 255
temperature.
ADJUST GAIN B
0 to 255
S03
GAMMA/
GAMMA SELECT
1 to 7
Switches the gamma table
KNEE
Currently, only 1 is valid
KNEE POINT
0 to 213 to 255
Sets the knee point level
KNEE SLOPE
1/2, 1/3, 1/4 , CLIP
Sets the knee slope level
S04
PEAKING
FREQUENCY
L, M, MH , H
Sets the center frequency of the
peaking signal
SOURCE
NAMY, Y , R, G, B
Sets the video signal that makes
the peaking signal
B MIX GAIN
0 dB ,
_
6 dB,
_
12 dB,
_
18 dB
Sets the mix gain that mixes the
peaking signal to the B ch
CRUMPLE
0 to 1 to 3
Sets the bit shift for crumpling
the peaking signal
RGB MIX
R , G, B, CY, MG, YL,
Sets the mix gain for R ch, G ch,
SKIN, SKY, FOIL, ORAN
and B ch when mixing the
peaking signal to the main signal
CRISPENING
0 to 5 to 63
Sets the level for crispening the
peaking signal
*
1 : The items of S01 and S02 are adjusted when shipped from the factory.
For information about adjustment, refer to Section 3 “Electrical Alignment”.
