1-11 (E)
HDVF-C950W
Board-to-board
PR-292 board
RE-237 board
PS2.5
x
5
1-7-4. Removing the RE-237 Board
1.
Remove the rear cover assembly.
(Refer to Section 1-7-1 step 1.)
2.
Remove the bezel assembly.
(Refer to Section 1-7-1 steps 2 to 5.)
3.
Remove the three screws and remove the RE-237
board.
n
When installing the RE-237 board, apply the screw
locking compound to the screws.
4.
Reinstall it by reversing the steps 1 to 3 of disassem-
bling.
1-7-5. Removing the LE-315 Board
1.
Remove the rear cover assembly.
(Refer to Section 1-7-1 step 1.)
2.
Remove the LCD unit.
(Refer to Section 1-7-1 steps 2 to 7.)
3.
Remove the four screws and remove the LED bracket
and the LE-315 board from the bezel assembly in the
direction of arrow.
m
.
To install the LED bracket and the LE-315 board to
the bezel assembly, pass the harness (LE) through
the cut-out for the harness (LE).
Be careful not to pinch the harness (LE) with the
LED bracket.
.
Do not scar the protection panel.
n
Standard tightening torque :
25
x
10
_
2
N
.
m (2.5 kg
.
cm)
4.
Disconnect the harness from the connector (CN1) of
the LE-315 board.
5.
Remove the two screws and remove the LED bracket
from the LE-315 board.
6.
Reinstall it by reversing the steps 1 to 5 of disassem-
bling.
B2.6
x
5
LE-315 board
Harness (LE)
LED bracket
BTP2.6
x
6
LED bracket,
LE-315 board
Bezel assembly
Cut-out for the harness (LE)
Harness (LE)
LE-315 board
(CN1)
LED bracket
