8
HCD-X10
3
Open the tray.
1
2
flat head screw driver
– Bottom view –
Connect jig (extension cable J-2501-242-A)
DISPLAY board (CN801) and MAIN board (CN507).
DISPLAY board
MAIN board
AV board
insulating sheet
CD mechanism deck
wire (flat type) (24 core)
Note 2: Do not remove the wire (flat type) (24 core) (CN1102).
If you remove the wire (flat type) (24 core) (CN1102),
solder the bridge of optical pick-up before removing.
Note 1: The jig (extension cable J-2501-242-A) connected between
the CN507 on the MAIN board and the CN801
on the DISPLAY board can be used only by TYPE-12.
Never use this jig in TYPE-11.
When the jig (extension cable J-2501-242-A) is used
by TYPE-11, the set is damaged.
Note:
Follow the disassembly procedure in the numerical order given.
HOW TO OPEN THE TRAY WHEN POWER SWITCH TURNS OFF
MAIN BOARD SERVICE POSITION
•
In checking the MAIN board (TYPE-12), prepare the extension jig
(Part No. J-2501-242-A: 1.00 mm Pitch, 11 cores, Length 300 mm)
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299