HCD-X10
14
2
wire (flat type) (5 core)
(CN1301)
3
wire (flat type) (21 core)
(CN514)
qs
wire (flat type)
(17 core: US, Canadian model(CN502)/
15 core: AEP UK model) (CN504)
wire (flat type)
(17 core: US, Canadian model)
(CN501)/
19 core: AEP UK model) (CN503)
4
wire (flat type) (11 core)
(CN507)
5
wire (flat type) (17 core)
(CN506)
qf
six screws
(BVTP3
×
6)
qh
screw
(BVTT3
×
8)
qg
two clamps (L35)
qj
ground plate (main)
0
two screws
(BVTP3
×
6)
qa
ground plate (ITA)
6
connector (CN1300)
7
connector
(CN412)
8
connector
(CN505)
9
connector
(CN515)
1
Perform work with this wire (flat type) (24 core) connected,
or make a bridge as mentioned above and then disconnect the wire (flat type) (24 core).
(Optical pick-up will be destroyed without bridging.)
On the contrary at the installation, connect the wire (flat type) (24 core) first,
and then remove the bridge.
Note: For a soldering iron, use the one with a ground wire.
(Refer to DISASSEMBLY 3-3. OPTICAL PICK-UP BLOCK (KHM-310CAA or KHM-313CAA)) (page 12)
PRECAUTION WHEN REMOVING WIRE (FLAT TYPE) (24 CORE)
3-6. MAIN BOARD
Note: The WIRE (FLAT TYPE) (11 CORE) connected with CN507
on the MAIN board is different by the type of the MAIN board.
Replace it for the WIRE (FLAT TYPE) (11 CORE) that is
sure to suit each type when you replace the WIRE (FLAT
TYPE) (11 CORE).
Refer to “NOTE OF REPLACING THE WIRE (FLAT TYPE)
(11 CORE) (CN507 ON THE MAIN BOARD – CN801 ON
THE DISPLAY BOARD)” in servicing notes for the
combination of the WIRE (FLAT TYPE) (11 CORE).
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
