4-54
BFC-1
5.
Replacement of BCR bracket
(1) Remove one screw, then remove the BCR bracket.
(2) Install the BCR bracket (DV) of BKFC-210 in the eleva-
tor with the screw (PWH 3x5) removed in step (1).
[Reference]
For the installation of a barcode reader, refer to Appendix
A in the Maintenance Manual.
[Note]
The remainder of the procedure vary with models.
.
DSR-60/80 series
:See procedure 6 through 8.
.
DSR-1600/1800/2000 series :See procedure 9 through 11.
6.
Hand assembly installation
(
For DSR-60/80 series VTRs)
(1) Install the hand assembly in the elevator with one screw.
(2) Connect the harnesses disconnected in step (2) of proce-
dure 1 to the former connectors.
7.
Height confirmation of VTR shutter plate
(
For DSR-60/80 series VTRs)
(1) Turn the gear shown in the figure so that the hand re-
tains the cassette while pressing the DV cassette against
the finger.
SCREW
(PWH 3
x
5)
BRC BRACKET
HAND
ASSEMBLY
SCREW
(PWH 4
x
8)
CN1
CN2
CN8
HAND
ASSEMBLY
GEAR
DV CASSETTE