4-33
BFC-1
(3) Raise the VTR with the handles in hands and insert the inner
rail into the outer member.
(4) Press the right and left stoppers and push in the VTR still
more.
Note: Be sure to perform the work in steps (3) and (4)
by two or more persons.
(5) Put the VTR in the rack and take out it from the rack two or
three times. At that time, confirm that the operation can be
performed smoothly.
Moreover, confirm that the guide pin of the rack and the pin
of the rail installation plate are smoothly put in the round
hole of the rail installation plate and the round hole of the
guide plate, respectively when the VTR is pushed in as far as
it will go.
If not, take out the VTR from the rack once and adjust the
installation position of the outer member.
VTR
<BKFC-53>
OUTER MEMBER
INNER RAIL
STOPPER
INNER RAIL
OUTER MEMBER
GUIDE PINS
<SIDE VIEW>
VTR
FRAME
RAIL
INSTALLATION
PLATE
FRAME
GUIDE
PIN
PIN OF RAIL
INSTALLATION
PLATE
OUTER MEMBER
FRONT
REAR