1-5
22
Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. The surround effects
you will enjoy depend on the connections and components you use.
Select a connection
Select one of the following connections,
through
.
* Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-D symbol are
trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories. All rights
reserved.
** “DTS” is a registered trademark of Digital Theater Systems, Inc.
Connection
Components to be connected
(page
23)
TV (stereo)
(page
24)
Stereo amplifier (receiver)
(having L and R audio input jacks only, or having a digital input jack)
• 2 speakers
(front L and R)
(page
24)
MD deck/DAT deck
(page
26)
AV amplifier (receiver) with a Dolby* Surround (Pro Logic) decoder
(having L and R audio input jacks only, or having a digital input jack)
• 3 speakers
(front L and R, and rear (monaural))
• 6 speakers
(front L and R, center, rear L and R, subwoofer)
(page
28)
AV amplifier (receiver) having a Dolby Digital or DTS** decoder, and
a digital input jack
• 6 speakers
(front L and R, center, rear L and R, subwoofer)
A
D
A
B
B
C
D
23
Hookups
Connecting to your TV
This connection will use your TV speakers for sound.
x
Recommended surround sound effects for this connection.
• TVS DYNAMIC (page 53)
• TVS WIDE (page 53)
The yellow plug is used for video signals (page 20).
A
Audio/video cord
(supplied)
CD/DVD player
TV
(white)
(red)
(yellow)
(white)
(red)
(yellow)
l
: Signal flow
to audio input
to AUDIO
OUT L
to
AUDIO
OUT R
AC power cord
(supplied)
AC power adaptor
(AC-F21, supplied)
(white) (red)
continued
24
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to an
MD deck or DAT deck
This connection will use your 2 front speakers connected to your stereo amplifier (receiver) for
sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use
. If the
amplifier (receiver) has a digital input jack, use
. When connecting to an MD deck or a DAT
deck, use
. In this case, you can also connect the player directly to the MD deck or DAT
deck without using your stereo amplifier (receiver).
x
Recommended surround sound effects for the
connection only.
• TVS STANDARD (page 53)
z
In connection
, you can use the supplied audio/video cord instead of using a separate audio cord.
z
To realize better surround sound effects, make sure that your listening position is in between your speakers.
Note
If you select one of the TVS effects while playing a disc, no sound will come from your speakers with the
connection.
B
B-1
B-2
B-2
B-1
B-1
B-2
25
Hookups
Stereo amplifier (receiver)
CD/DVD player
Stereo audio cord
(not supplied)
Optical digital cord
(not supplied)
to audio input
to optical digital
input
(white)
(red)
(white)
(red)
[Speakers]
Front (L)
Front (R)
MD deck/DAT deck
or
l
: Signal flow
to AUDIO
OUT R
to AUDIO
OUT L
to DIGITAL OUT
(OPTICAL)
AC power adaptor
(AC-F21, supplied)
AC power cord
(supplied)
(white) (red)
continued