manualshive.com logo in svg

Sony DSR-2000A, Руководство по обслуживанию

Поделиться
Скачать
Sony DSR-2000A Скачать руководство пользователя страница 86

5-4

DSR-2000A/2000AP

5-3. Contents of Maintenance Menu

5-3-1. Menu Data Control

The MENU DATA CONTROL item provides a SETUP MENU data display and saving and loading the
SET UP MENU data.
This item is used to return the settings to their original values after maintenance is complete or ROM
upgrading is complete.

Operating procedure

1.

Enter the maintenance menu.

2.

Move the cursor to “MENU DATA CONTROL” which is
displayed with a white background, using the 

[AUDIO|IN]

(

↑

), 

[IN]

  (

↓

) keys.

3.

Press the 

[ENTRY]

 (

→

) key.

“MENU DATA CONTROL” is selected and its lower layer
submenu appears.

4.

Move the cursor displayed with a white background to a
desired item using the 

[AUDIO|IN]

 (

↑

), 

[IN]

 (

↓

) keys.

5.

When an item is selected, press the 

[ENTRY]

 (

→

) key.  The

contents of the selected item appear.

6.

Press the 

[DELETE]

 (

←

) key to exit MENU DATA CON-

TROL and return to the main menu.

7.

Press the 

[MENU]

 key to exit the maintenance menu.

Содержание DSR-2000A











































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды