Sony DNW-30P, Руководство по обслуживанию

Страница: 12 / 116

1-2
DNW-A30/A30P
DNW-30/30P
n
AC power supply is repuired a capacity which is commen-
surate with rush current.
If the capacity of the AC power supply is not enough, the
breaker of AC power of a supply side may operate or this
unit may not operate normally.
1-4-2. Power Cord
w
Use the specified power cord only when connecting.
Never use a injured power cord.
Power cord for the customer in the U.S.A. and Canada.
1
DK-2401(UC) (approx. 2.4 m)
2
Plug holder (Black) 2-990-242-01
Plug holder is included in DK-2401(UC).
Power cord for the customer in the United Kingdom.
1
DK-2401(UK) (approx. 2.4 m)
2
Plug holder (Black) 2-990-242-01
Plug holder is included in DK-2401(UK).
Power cord for the customer in Europe except the United
Kingdom.
1
DK-2401(AE) (approx. 2.4 m)
2
Plug holder (Black) 2-990-242-01
Plug holder is included in DK-2401(AE).
If the unit is used in the area except above, please consult
with local Sony's sales/service office.
1-3. Operating Conditions
1-4. Power Supply
1-3. Operating Conditions
c
Good air circulaiton is essential to prevent internal heat
build-up. Place the unit in location with sufficient air
circulation.
Do not block the ventilation holes of the cabinet and the
front and rear panels.
Operating temperature:
+
5
d
C to
+
40
d
C
Operating humidity: 25 % to 80 %
(Condensation not allowed)
Storage temperature:
_
20
d
C to
+
60
d
C
Locations to avoid:
. Areas where the unit will be exposed to direct sunlight
of any other strong lights.
.
Areas near heat sources.
.
Dusty areas or areas subject to vibration.
. Areas with strong magnetic field.
. Areas with much electrical noise.
.
Areas with much static electricity.
.
Areas that is impossible to find a specified room for
installation.
(Refer to “1-5. Installation Space” on page 1-3.)
Horizonal condition: Do not slant the front or rear of
the unit more than 30
d
.
c
Fix the unit securely to avoid slipping if the unit is not
operated at horizonal place.
1-4. Power Supply
1-4-1. Voltage and Power Requirements
w
Be sure to operate the unit within the range of following
power voltage.
Power voltage: AC 100 to 240 V
±
10 %
Power frequency: 50 Hz or 60 Hz
Power consumption: DNW-A30/A30P; 200 W (200 VA)
DNW-30/30P; 180 W (180 VA)
Rush current: Power voltage 100 V IN; 10 A
Power voltage 240 V IN; 20 A
This unit’s power line has a switching regulator with the
power factor 98%.
2
AC inlet
1
AC inlet
2
1
AC inlet
2
1