116
Changing the SETUP display
Icon/Item
OTHERS
DATA CODE
AREA SET
DST SET
BEEP
COMMANDER
DISPLAY
REC LAMP
Option
z
DATE/CAM
DATE
—
z
OFF
ON
z
MELODY
NORMAL
OFF
z
ON
OFF
z
LCD
V-OUT/LCD
z
ON
OFF
Meaning
To change the display in the order of the date
and time
t
the camera data
t
the display each
time pressing DATA CODE (page 59).
Press DATA CODE on the Remote Commander
to display date and time during playback.
To set your local area.
To cancel the use of daylight savings time.
To use the daylight savings time.
To output a melody when you start/stop
recording or when an unusual condition occurs
on your camcorder.
To output the beep instead of the melody.
To cancel the melody, beep sound and shutter
sound.
To activate the Remote Commander supplied
with your camcorder.
To deactivate the Remote Commander to avoid
erroneous remote control operation caused by
other equipments' remote control.
To show the display on the LCD screen and in
the viewfinder.
To show the display also on the TV screen.
To light up the camera recording lamp on the
front of your camcorder during recording.
To turn the camera recording lamp off so that
the subject is not aware of the recording.
Mode dial
Play/Edit
Movie
Still
Play/Edit
Movie
Still
Play/Edit
Movie
Still
Play/Edit
Movie
Still
Play/Edit
Movie
Still
Play/Edit
Still
Movie
(operation on
the Remote
Commander)
