Sony Cyber-shot DSC-W100, Руководство по обслуживанию

Страница: 104 / 109

6-25
DSC-W100_ADJ
5. Data Save Error
Fig. 6-1-56
Symptom
data cannot be saved normally. (The data set-
ting during adjustment cannot be cancelled)
Cause
•
Data writing to the flash memory failed.
•
Connection is faulty.
•
Power supply is not installed correctly.
Remedy
•
On the SEUS Operation screen,
[Set]
the data
to the pages and addresses displayed in the
message, and
[Save]
them. (Cancel manually
the data setting during adjustment.)
•
Check the connection.
•
Install the power supply correctly.
1-6-2. Precautions When an Error Occurred
The Automatic Adjustment Program sets the data for adjustment
before the adjustment starts. Accordingly, if the adjustment termi-
nates by an error, the data during the adjustment may be left in the
camera.
Note 1: With this data left in the camera, the camera will not op-
erate normally.
In this case, the
[Release Data Setting]
button is displayed in “red”
on the screen as shown in Fig. 6-1-57, 58 and 59. Click the
[Release Data Setting]
button to cancel the data setting. When the
data setting is cancelled, the button color becomes “white”.
Note 2:
When “Data Save Error” occurred, the
[Release Data Set-
ting]
button is displayed in “white”.
To cancel the data setting, perform it on the SEUS Op-
eration screen. How to cancel the data setting is displayed
in the error message.
Video System Adjustment screen
Fig. 6-1-57
Camera System Adjustment screen
Fig. 6-1-58
LCD System Adjustment screen
Fig. 6-1-59
How to cancel the
data setting during
adjustment is
display here.