Sony Cyber-shot DSC-W100, Руководство по обслуживанию

Страница: 81 / 109

6-2
DSC-W100_ADJ
Initial Language Data Check
If the SY-154 board was replaced, initial language setting may be changed. Accordingly, change the following data so
as to set same initial language as that of the set distributing in each region.
Initial language: Language displayed at the next starting if the setting of Setup menu was reset.
It is different from the language setting selectable with the menu.
Initial Language Data
Page Address Data Language GP2 GP3 GP4
00 English
z z z
04 Spanish
z z
4F 88, 8C
06 Portugal
z
08 Simplified Chinese
z
0B Russian
z
0D Korean
z
Note: GP2 is fixed to English.
GP3 is either English, Spanish, or Russian.
GP4 is either English, Spanish, Portugal, Simplified Chinese, or Korean.
Writing Method:
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 40, address: 70, and set data: 01.
3) Select page: 40, address: 98, and check that the data is “00”.
4) Select page: 4F, address: 88, and set the Initial Language Data.
5) Select page: 4F, address: 8C, and set the Initial Language Data.
6) Click
[Save]
on the SEUS screen.
7) Select page: 80, address: 34, and check that the data is “00”.
8) Select page: 80, address: 30, and check that the data is “00”.
9) Select page: 00, address: 01, and set data: 00.
10) Turn off the camera.
11) Turn on the camera. Execute “Initialize” of Setup screen.
12) Check the language displayed when the camera starts.