Sony Cyber-shot DSC-W100, Руководство по обслуживанию

Страница: 13 / 109

1-3E
DSC-W100_L2
1-4. PRECAUTION ON REPLACING THE SY-154 BOARD
VIDEO OUT Default Data Check
When you replace to the repairing board, the written data of repairing board also might be changed to original setting because of broadcast
system (NTSC/PAL).
When the data has changed because of board replacing etc., check the default data of VIDEO OUT if destination code is right. If not, rewrite
to the right value.
VIDEO OUT Default Data
Writing Method:
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 40, address: 70, and set data: 01.
3) Select page: 40, address: 98, and check that the data is “00”.
4) Select page: 4F, address: A2, and set data: 00 (NTSC) or data: 01 (PAL).
5) Select page: 4F, address: 8D, and set data: 00 (NTSC) or data: 01 (PAL).
6) Click
[Save]
on the SEUS screen.
7) Select page: 80, address: 34, and check that the data is “00”.
8) Select page: 80, address: 30, and check that the data is “00”.
9) Select page: 00, address: 01, and set data: 00.
Initial Language Data Check
If the SY-154 board was replaced, initial language setting may be changed. Accordingly, change the following data so as to set same initial
language as that of the set distributing in each region.
Initial language: Language displayed at the next starting if the setting of Setup menu was reset.
It is different from the language setting selectable with the menu.
Initial Language Data
Page Address Data Language GP2 GP3 GP4
00 English
z z z
04 Spanish
z z
06 Portugal
z
4F 88, 8C
08 Simplified Chinese
z
0B Russian
z
0D Korean
z
Note: GP2 is fixed to English.
GP3 is either English, Spanish, or Russian.
GP4 is either English, Spanish, Portugal, Simplified Chinese, or Korean.
Writing Method:
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 40, address: 70, and set data: 01.
3) Select page: 40, address: 98, and check that the data is “00”.
4) Select page: 4F, address: 88, and set the Initial Language Data.
5) Select page: 4F, address: 8C, and set the Initial Language Data.
6) Click
[Save]
on the SEUS screen.
7) Select page: 80, address: 34, and check that the data is “00”.
8) Select page: 80, address: 30, and check that the data is “00”.
9) Select page: 00, address: 01, and set data: 00.
10) Turn off the camera.
11) Turn on the camera. Execute “Initialize” of Setup screen.
12) Check the language displayed when the camera starts.
Address
00 01 8D, A2 4F
Page
Data
NTSC PAL