Sony Cyber-shot DSC-W100, Руководство по обслуживанию

Страница: 102 / 109

6-23
DSC-W100_ADJ
1-5-3. Adjusting Method
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during LCD Adj. & EVR Data Write
2. COM AC Adj.
3. V-COM Adj.
4. White Balance Adj.
5. Release of Data Setting during LCD Adj.
[Adjusting method]
1) Click the
[Start]
button of the LCD Adjustment.
2) The Automatic Adjustment Program executes “1. Data Setting
during LCD Adj. & EVR Data Write” and “2. COM AC Adj.”.
3) Upon successful completion of the “2. COM AC Adj.”, the
following message is displayed during execution in “3. V-COM
Adj. ”. On the SEUS screen, operate the UP/DOWN key so
that the brightness of portions A and B on the LCD panel is
equal. After the adjustment, click the
[OK]
button.
Fig. 6-1-47
4) Upon completion of “3. V-COM Adj.”, “4. White Balance Adj.”
is executed. The following message is displayed, and then check
that LCD screen is not colored.
If colored, change the data of page: 8F, address: 42 and 43 on
the SEUS Operation screen to adjust so that the LCD screen is
not colored.
Fig. 6-1-48
5) If the
[OK]
button is clicked, “5. Release of Data Setting dur-
ing LCD Adj.” will be executed.
6) Upon successful completion of all item the LCD Adjustment,
the following message is displayed. Click the
[OK]
button.
Fig. 6-1-49
SEUS operation screen
Fig. 6-1-50
Check on the LCD screen (V-COM Adj.)
Fig. 6-1-51
UP/DOWN key
A B