Television
Preparing 3D Glasses (3D models only)
There are two types of 3D Glasses: Passive 3D Glasses and Active 3D Glasses. Refer to a paper manual supplied with
this TV to see which type of 3D Glasses it supports. Then follow the instructions below to prepare the 3D Glasses.
For Passive 3D Glasses
When Passive 3D Glasses are supplied with your TV, use them. When no glasses are supplied, purchase a pair of
Passive 3D Glasses, model TDG-500P. You can watch in 3D by just putting the Passive 3D Glasses on.
For Active 3D Glasses
When Active 3D Glasses are supplied with your TV, use them. When no glasses are supplied, purchase a pair of Active
3D Glasses, model TDG-BT500A. Before using the Active 3D Glasses for the first time, you need to register them to
your TV. Follow the steps below.
1. Remove the battery’s insulation sheet.
2. Turn the TV on, then hold the glasses within 50 cm (1.6 ft.) of the TV.
3. Press and hold the
(Power) button/indicator on the glasses for 2 seconds.
The Active 3D Glasses turn on and registration starts (the
(Power) button/indicator blinks green and yellow).
When registration is finished, a message appears in the TV screen for 5 seconds, and the indicator lights up green
for 3 seconds.
If registration fails, the Active 3D Glasses will turn off automatically. In this case, repeat the above procedure.
Help Guide
67