Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/90 A
Sony Ericsson Mobile Communications AB
9(62)
Step-by-Step Instructions
30. Then lift the circuit board away from the back
cover.
3 Reassembly
Tools:
•
Torque screwdriver
•
Orange stick
•
JCIS No. 0 bit
•
Nylon pointer
•
Style 2A ESD-safe tweezers (Blunt Tip)
•
Front opening tool
NOTE!
Whenever the phrase “pry tool” is used, a nylon pointer, an orange stick, or a front
opening tool may be used, depending on the user’s preference.
Step-by-Step Instructions
NOTE! Make sure that the camera gasket is in
its correct position before proceeding so
that the circuit board fits correctly into
the back cover.
1. Lay the edge of the circuit board inside the edge
of the back cover so that the contact pads on the
board for audio jack are adjacent to the jack in
the back cover as shown.
