Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/90 A
Sony Ericsson Mobile Communications AB
33(62)
Step-by-Step Instructions
NOTE! Avoid damaging or contaminating the
conductive elastomer when removing or
reinstalling the microphone assembly.
If the conductive elastomer comes off
during the removal of the microphone
assembly, use a new microphone
assembly in the new back cover.
28. Remove the microphone assembly from the
microphone cavity in the back cover.
29. Insert the microphone assembly into the
microphone cavity of the new back cover so that
the side of the microphone assembly with the
three holes is down inside the microphone
cavity. Use the flat end of a pry tool to press the
microphone assembly down into it cavity so that
contamination of the conductive elastomer is
avoided.
NOTE! The side of the microphone assembly
with the two gold concentric rings is
the side of the microphone assembly
that should be visible if the
microphone assembly is correctly
installed. There should be a clear
elastomer over the top of the two gold
concentric rings.
30. Remove the audio jack cover from the audio jack
hole.
