Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/90 A
Sony Ericsson Mobile Communications AB
60(62)
4.24 Water Indicator Label
Tools:
•
ESD-safe tweezers
•
Lint-free wipes
•
Orange stick
•
Nylon pointer
•
Front opening tool
NOTE!
Whenever the phrase “pry tool” is used, a nylon pointer, an orange stick, or a front
opening tool may be used, depending on the user’s preference.
•
Perform the steps of “Disassembly” section before proceeding.
Step-by-Step Instructions
1. Using the flat end of a pry tool, gently remove
the water indicator label.
2. Clean off any adhesive residue in the label area
using alcohol and a lint-free wipe.
3. Obtain a new water indicator label and place the
new label on the circuit board near the battery
connector in the location shown.
4. Apply pressure to the water indicator label so
that a good bond forms between the label and the
circuit board.
•
Perform the steps of “Reassembly” section to complete the reassembly of this phone.
