Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/90 A
Sony Ericsson Mobile Communications AB
40(62)
4.13 Camera Gasket
Tools:
•
2A (blunt tip) ESD-safe tweezers
•
Perform the steps of “Disassembly” section before proceeding.
Step-by-Step Instructions
1. Remove the camera gasket from its position in
the back cover using a pair of tweezers.
NOTE! The camera gasket some times sticks to
the circuit board when the circuit board
is removed so if the speaker gasket is
not present in the back cover locate it.
NOTE! When installing the camera gasket, a
portion of the camera gasket has to be
worked under a speaker contact
2. Insert the camera gasket into to the back cover as
shown.
NOTE! Make sure that an alignment peg
protrudes through the hole at each end
of the camera gasket.
•
Perform the steps of the “Reassembly” section to complete the reassembly of this phone.
