Sonuscore TIME TEXTURES, Руководство пользователя, Страница: 32 / 41

TIME TEXTURES
MANUAL
32
8.2.5 Reverb
The FX Rack houses two reverb types, a Plate Reverb module and a Reverb module.
(1) The Plate Reverb module contains the following controls:
Pre-Delay : Introduces a short amount of delay before the reverb
takes effect.
Size : Adjust the size of the room simulated by the reverb effect. Hig-
her values replicate larger rooms.
Mix (Dry/Wet Knob): Adjusts the respective levels of the original and
processed signals. In common scenarios, the delayed signal is mixed
in at a lower level than the direct signal.
(2) The algorithmic Reverb module contains the following controls:
Time : Adjusts the duration of the reverb effect.
Damping : Adjusts the amount of absorption in the room simulated by
the reverb effect. Higher values result in more absorption.
Mix (Dry/Wet Knob): Adjusts the respective levels of the original and
processed signals. In common scenarios, the delayed signal is mixed
in at a lower level than the direct signal.
8.2.6 Modulation
The Modulation Section of TIME TEXTURES includes all the main modulation fx from Kontakt. Available are
Chorus , Flanger , Phaser .
(1) Chorus “thickens” the audio signal by splitting it up and detuning one version in relation to the original.
The Chorus module contains the following controls:
Rate : Adjusts the speed of modulation, from slow pitch changes to
fast vibratos. This becomes more pronounced as the amount is in-
creased.
Depth : Adjusts the range of modulated detuning. Higher values give
a more pronounced chorusing effect.
Mix (Dry/Wet Knob): Adjusts the respective levels of the original and
processed signals. Note that the typical chorus effect is created by
the combination of both signals, so setting this knob to the midpoint results in the most pronounced effect.
1
2
1