34
7 Advanced
Song Control
– This allows you to skip to the next or previous selection in
a play list. A short press skips to the next selection while a longer press (1
second) skips to the previous selection.
Volume Control
– Short press increases the volume level by one unit and
the longer press decreases it by one.
Control Output 1
This controls the state of the relay contacts:
Not Used – output is disabled.
Permanent – output is always active.
Operation – output is active while the device is in an operational state.
Output is inactive in the standby mode.
Audio – output is active while audio is being output.
Remote – Output can be controlled by the remote unit (PS-SEND).
Remote Management
SNMP Trap Receiver
Enter the IP address of the SNMP trap receiver.
Security
Factory Defaults
Enable or disable the ability to return the unit to factory defaults. To return
the unit to factory defaults, hold the reset button for 10 seconds.
Update Function
Enable or disable the ability to update the unit remotely. The serial update
program will still work however.
Set Password
This is visible while no password is set. Enter a password and submit (max.
25 characters).
A password box will show after reset. The user name can be left blank.
Old/New Password
These are visible while a password is set. Enter the old and new passwords,
then submit (max. 25 characters). Leave the new box blank to clear
password protection.
