4
2 PS-SEND Audio to IP Streaming Encoder
Rear Panel Connections and Operation
All the audio connectors together with the ethernet, serial and GPI/O connectors are found on the rear panel of the unit. All the audio connections are
inputs on this unit.
AES/EBU Balanced
Digital Input
The stereo digital input XLR 3 pin
ƐŽĐŬĞƚŚĂƐĂŶŝŵƉĞĚĂŶĐĞŽĨϭϭϬɏĂŶĚ
the following connections:
Pin 1: Screen
Pin 2: Phase
Pin 3: Non-phase
The signals on this connector should
meet the IEC 60968 specification
S/PDIF Unbalanced
Digital Input
The stereo S/PDIF input is an RCA
phono connector and is typically used
for consumer digital audio. The S/PDIF
ŝŶƉƵƚƐŚĂǀĞĂŶŝŵƉĞĚĂŶĐĞŽĨϳϱɏ͘
Pin: Signal
Ring: Screen
Balanced Analogue Inputs
The two XLR 3 pin sockets used for
the left and right channel inputs are
electronically balanced and have an
ŝŵƉĞĚĂŶĐĞŽĨхϭϬŬɏďƌŝĚŐŝŶŐ͘ĂĐŚy>Z
has the following
connections:
Pin 1: Screen.
Pin 2: Phase.
Pin 3: Non-phase.
Unbalanced Analogue Inputs
The two left and right RCA inputs are
unbalanced and have an impedance of
хϮϬŬɏ͘dŚĂLJĂƌĞĐŽŶŶĞĐƚĞĚĂƐĨŽůůŽǁƐ͗
Pin: Signal
Ring: Screen
Fig 2-6: PS-SEND XLR Analogue Inputs
Fig 2-7: PS-SEND RCA Phono Analogue
Inputs
Fig 2-8 PS-SEND AES/EBU Input
Fig 2-9: PS-SEND S/PDIF Input
Fig 2-5: PS-SEND Rear Panel
