8
3 PS-PLAY IP to Audio Streaming Decoder
Front Panel Controls & Operation
All controls and indicators are located on the front panel.
POWER LED
When on this blue LED indicates that the unit is powered.
STATUS LEDs
There are two LEDS, red and green, which together indicate boot up errors
and when data is being received. The LEDs have the following meanings:
Red LED
Green LED
Status
Description
Flashing
On
Boot Load The boot loader is running
to start the unit.
Flashing
Continuously
Flashes 5 Times
Boot Up
The unit is attempting to
configure an IP address.
Off
On
Running
The unit is running but not
receiving data.
Off
Quick Flashing
Running
The unit is receiving data.
Off
Blinks once every
2 seconds
Running
Unit is playing URL 1
Off
Blinks twice every
2 seconds
Running
Unit is playing URL 2
Off
Blinks three times
every 2 seconds
Running
Unit is playing URL 3
Off
Blinks four times
every 2 seconds
Running
Unit is playing priority URL
Infra Red Receiver
Some basic functions can be controlled by an IR-Remote which is supplied.
Point the IR Receiver at this LED.
Reset Button
The Reset button is used to restart the firmware and re-initialise the unit.
Please use this button in the unlikely scenario of unit failure.
Fig 3-2: PS-PLAY Power & Status LEDs
Fig 3-3: PS-PLAY Infra Red Receiver
Fig 3-4: PS-PLAY Reset Button
