31
Advanced 7
In RTP, the address field can be used in two ways:
Enter 0.0.0.0 to be able to receive a stream from any other IP on the same
port.
Enter a specific address to be able to receive streams only from that
address.
File:// URL syntax
To play audio from the USB device, use paths and song titles:
“file://folder/song.ext”
The protocol can be omitted for this however, as if there is no protocol in
the URL field. File:// is assumed.
File names and directory names can be up to 255 characters long and must
only be of the Western European character set.
Playback Settings
Volume
Use this drop down box to alter the volume. The volume is set in 5%
increments.
Bass
Alter the amount of bass in a stream. Set between 10 and -10.
Treble
Alter the amount of treble in a stream. Set between 10 and -10.
Shuffle
Shuffle the order of items in a play list, by turning on. If shuffle.txt is already
present on a USB stick and the play list is being played from the USB stick, it
will shuffle regardless of this setting.
USB Autoplay
Use this to automatically play all compatible audio file present on a USB
stick. A play list is created, along with a shuffle file, and they are stored on
the USB stick.
Advanced Section
The advanced section is spit into eight pages which can all be selected via
the drop down menu.
Network Settings
IP Address
Enter a four digit number to give the unit a unique ID on the network.
Remember to ping the address before assigning it to see if it is free
otherwise the unit will wait for the address to become free. Alternatively,
set the IP to 0.0.0.0 to enable DHCP.
Netmask
Use a netmask to mask the network IP numbers which are common to
all devices on the subnet e.g. for a class c network where the first three
numbers are common to all devices, use 255.255.255.0.
Gateway IP Address
The gateway allows access to the internet and computers outside the LAN.
Enter the 4 values into the boxes
Primary and Alternative DNS
A DNS is needed to relate IP addresses to their URLs. Speak to the network
administrator to find out the DNS address. An alternative is needed just in
case the first one is unreachable.
Please note that if the IP is set to 0.0.0.0 then it is likely that the netmask,
gateway and DNS server values will have been automatically set. These can
be left as 0.0.0.0 also in this case.
