SonicWALL CDP 6.0, Руководство администратора

Страница: 65 / 272

Configuring the System Settings
50
SonicWALL CDP 6.0 Administrator’s Guide
Preparing the SonicWALL CDP Appliance
You can manage the SonicWALL CDP appliance from SonicWALL GMS. The System > GMS
page provides a way to add the SonicWALL GMS host name or IP address, and to specify the
number of seconds between heartbeats sent to the SonicWALL GMS system.
For more information about adding the appliance to SonicWALL GMS management, see
“Adding the SonicWALL CDP Appliance to GMS” on page 51 .
To prepare the SonicWALL CDP appliance for GMS management:
Step 1
On the System > GMS page, type the GMS host name or IP address of the GMS server and
the port number in the GMS Host Name or IP Address field. The default port is 514.
Step 2
Under Heartbeat/Syslog , select the Enable checkbox to enable the CDP appliance to send
periodic heartbeats to SonicWALL GMS, and to enable the CDP to send syslog message to
GMS.
Step 3
In the Name/IP Address field, type the FQDN or IP address of the SonicWALL GMS system.
Step 4
In the Port field, enter the port number to be used when sending heartbeats or syslog
messages.
Step 5
In the Interval field, enter the heartbeat interval, in seconds, . The maximum heartbeat interval
is 86400 (24 hours).
Step 6
In the Minimal Syslog Priority drop-down list, select one of the following:
•
Critical – Only send critical syslog messages
•
Warning – Send critical and warning syslog messages
•
Informational – Send all syslog messages
Step 7
Under Activity Report , select the Enable checkbox to enable the CDP appliance to send
periodic activity reports to SonicWALL GMS.
Step 8
In the Name/IP Address field, type the FQDN or IP address of the SonicWALL GMS system.
Step 9
In the Port field, enter the port number to be used when sending activity reports.
Step 10
Click Apply .