16
Auto-dialer priority
This system stores up to six (6) telephone numbers in the Main Console. If it is triggered and alarm is
activated, the auto-dialer will call the pre-set 4 sets telephone numbers and play your pre-recorded
message.
If system is triggered
Burglary help
- It will automatically dial phone 4
→
phone 1
→
phone 2
→
phone 3
call sequentially by 3 cycles attempt (4, 1, 2, 3). When telephone
answered, it will playback message 2 times
Fire help
- It will automatically dial phone 5
→
phone 1
→
phone 2
→
phone 3,
call sequentially by 3 cycles attempt (5, 1, 2, 3). When telephone
answered, it will playback message 2 times
Medical help
- It will automatically dial phone 6
→
phone 1
→
phone 2
→
phone 3,
call sequentially by 3 cycles attempt (6, 1, 2, 3). When telephone
answered, it will playback message 2 times
LCD “MSG” : Message indicating on LCD
This system will leave warning message on LCD panel while sensors opened or triggered or in low
battery. It also emits 3 short ‘Beep’ at every 10 Sec. to remind you in the meantime, It can be stored first
5 messages and displayed on the LCD. If you want to check or delete the MSG, the system need to be
in disarm mode. LCD display shown as below.
Press ENTER button to read the message. Press ENTER again will read next message… etc.
Press CANCEL button to delete all ‘MSG’. It will show as below.
00 HOME SECURITY
Disarmed MSG
63 DOOR SENSOR
01 Open
MESSAGE DELETED
