12
9.
If sensors have learned and reach 63 zone numbers, LCD panel shows memory full
message.
NOTE
:1. Sensors belong to 24 hours included:
Smoke Detector, Gas Detector, Panic Watch, Remote Control Handset(PANIC button)
2. Distinguish
A-AWAY
and
H-HOME
mode:
When system is armed in
HOME
mode, Main Console will neglect the transmission
signal from the PIR Detector.
2-REPLAC
: To replace the sensor. (When sensor is faulty or needs replacement)
To replace the original sensor, only need to key-in sensor learned order
number. Finish the number key-in and press ENTER , system will ask
for relearning the Sensor, you can trigger the sensor and learn the sensor
into the main console.
Note: Please use the same type sensor to replace the old one.
Press 2 to go to replace sensor mode. LCD panel shows as below.
Once replace is finish, It will go back to upper menu.
Replace Sensor
Enter Sensor Num :
Sequential Pgming
Mem Full
63
Trigger Sensor To
Replace 01
SYS_OPTS: 0-SYS_OPTS
1 – SEQ 2 – REPLAC 3 - CLR
