S-50 DC
● S-80 DC ● S-110 DC ● S-120 DC – USER MANUAL
7
3
Preparation for use
3.1
Front plate of the device
Fig. 3.1 Tester connections
HV attachment with high-voltage terminal
Carrying handle
Oil-level lens
Ground terminal
Terminal for connecting cable to operating unit
Primary fuses
Ground terminal for operating unit
3.2
Operating requirements
The carrying handle of the operating unit is designed for one-hand operating. After putting down
the device carrying handle can be locked in 30°-steps by using a pull spring. Pulling on handle unfixes
the lock.
During operation the operating unit can stay inside of its soft case. The connecting cables are in
the front cover of the operating unit.
The high-voltage unit must always be set up in an upright position and secured against accidental
contact during operation.
